Runco DLC-2000HD Projector User Manual


 
10
Menu Description and Navigation
INPUT SELECT
Standard Video:
Composite
S-Video
Component
High Definition:
Component
RGB
ASPECT RATIO SELECT
Menu Tree
Anamorphic
Standard 4:3
Letterbox
Through the Main Menu, you can easily switch sources and Aspect Ratios.
To select a source, you may either use the direct access buttons on the remote (pg. 9) or the
Left/Right buttons on the remote or Front Panel (pgs. 7, 10). If you wish to select a source via the Main
Menu, press MENU, highlight the desired source with the Up/Down arrows and press Enter. The arrow
to the left of the sources indicates the source currently in use.
To select an Aspect Ratio, you may use either the direct access buttons on the remote (pg. 9) or
the Up/Down buttons on the remote or Front Panel (pgs. 7, 10). If you wish to select an Aspect Ratio
via the Main Menu, press MENU, highlight ASPECT RATIO and press Enter. The Aspect Ratio selection
menu will then appear; highlight the desired Aspect Ratio with the Up/Down buttons and press Enter.
If you are in the Main Menu and you highlight the currently selected source and press Enter, you will see
the image quality adjustment menu. You can access these functions (Contrast, Brightness, Color, Tint)
by highlighting one and pressing Enter. For best results, it is recommended that these adjustments be
left the way the installer set them during initial installation. These adjustments are detailed in the DLC-
2000HD installer menu.
Main Menu
>