Filter
Top Products
SAGEM 3P@C
3P@C Installation Manual
Page 7-19 Reproduction and communication in any form prohibited without the written permission of
SAGEM SA
Step 2: Use the default user name “admin” and default password “3P@C” to log in.
prompt
To use the original configuration continuously, the user can go
on to Step 3. To configure the user name and password again,
ignore the following steps.
Step 3: Transfer the startup-config configuration file to the terminal equipment in the FTP/Xmodem mode.
Step 4: Modify the uploaded file. Replace the user management part of the uploaded configuration file with the
following data:
user add admin login-password b58317da28dc92ba6c5509c317c633b8
user role admin ADMIN enable-password b58317da28dc92ba6c5509c317c633b8
Step 5: Download the modified configuration file to the Flash of the equipment
Step 6: Reboot the equipment.