Setting up & Operating the Auro Series
Note
Note
It’s fairly easy to identify a monitor that is out of phase just by listening, espe-
cially on a pop record. Listen for the parts of the music that you would expect to be in
cially on a pop record. Listen for the parts of the music that you would expect to be in
the center of the mix like kick drum and vocals. If you do not hear them directly in the
the center of the mix like kick drum and vocals. If you do not hear them directly in the
center (for instance they sound like they are two signals panned hard right and left)
center (for instance they sound like they are two signals panned hard right and left)
then you are more than likely listening to an out-of-phase monitor system. (This test
then you are more than likely listening to an out-of-phase monitor system. (This test
won’t work on early Beatles records where Ringo’s drum kit is panned all the way to the
won’t work on early Beatles records where Ringo’s drum kit is panned all the way to the
right side. Try a Madonna record.)
right side. Try a Madonna record.)
Powering the Auro Series
Powering the Auro Series
FROM MIXER
TO PRE VENT S HOCK DO NO T
OPEN. NO US ER SE RVIC ABLE
PARTS INSIDE. REFER SERVICING
TO QU A L I FI E D S E R V I C E
PERSONNEL. TO PREVENT FIRE
OR SH OCK HA ZAR D DO NOT
EXPOSE TO RAIN OR MOISTURE.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
S/N
FUSE
6A/250V
CAUTION
!
~AC INPUT
115V/60Hz, 490W
USE CLASS 2 WIRING MINIMUM LOAD IMPEDANCE 4
RIGHT
LEFT
+RIGHT
LEFT+
GROUND
S ERV O 1 7 0 ST U DIO AMP L IFIER
RIGHT LEFT
INPUTS
(BALANCED 10K
/0dBM)
CAUTION
;
REPLACE WITH
THE SAME TYPE FUSE AS
INDICATED. UTILISER UN
FUSIBLE DE RECHANGE DE
MEME TYPE.
CAUTION
HEATSINK MAY BE HOT!
DO NOT BLOCK AIRFLOW
OR OVERHEATING MAY
OCCUR.
SAMSON
(UNBALANCED 10K
/0dBM)
R L