Samson AX1 Laser Pointer User Manual


 
1: Antenna - This swivel mounting allows full rotation for
optimum placement of the antenna. In normal operation,
the antenna should be placed in a vertical position. It can
be folded inward for convenience when transporting the
AR1. See the Setting Up and Using Your AirLine System
section on page 17 in this manual for more information
about antenna positioning.
2: Power On / RF LED - This lights red whenever the AR1 is
powered on and green whenever the AR1 is receiving RF
signal from a transmitter.
3: Peak LED - This LED lights red when output signal from
the AR1 is at the onset of clipping (that is, when it is on the
verge of being distorted). If you see this light during
operation, move the microphone further away or lower the
volume level of your instrument or transmitter. For more
information, see the section entitled Setting Up and Using
Your AirLine System on page 17 in this manual.
4: Power switch - Move this switch in the direction of the
arrow to turn power to the AR1 on; move it away from the
arrow to turn power off.
5: Volume control - This knob sets the level of the audio
signal being output through both the AR1 balanced and
unbalanced output jacks (see #6 and #7 on the following
page). Reference level is obtained when the knob is turned
fully clockwise.
4
Samson AirLine
Guided Tour - AR1 Receiver
ENGLISH