Filter
Top Products
User’s Manual
Introduction
Front
(SyncMaster 152T)
1. Auto button
Use this button to auto adjustment direct access.
2. Exit button
Source button
Use this button to Exit the active menu or the OSD.
When push the 'Source' button, then Selects the Video signal while the OSD
is off. (When the Source button is pressed to change the input mode, a
message appears in the center of the screen displaying the current mode --
analog or digital input signal.)
Note:If you select the Digital mode, you must connect your monitor to the
graphic card with a digital port using the DVI cable.
3. Adjust buttons
These buttons allow you to highlight and adjust items in the menu.
4. Menu button
Use this button to open the OSD and activate a highlighted menu item.
5. Power button
Use this button to turn the monitor on and off.(When the power is turned on, a
message appears in the center of the screen displaying the current mode --
analog or digital input signal.)
6. Power indicator
This light glows green during normal operation, and blinks green once as the
monitor saves your adjustments.
Note: See PowerSaver described in the manual for further information regarding power saving functions.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods.