Filter
Top Products
User’s Manual
Setup
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the si
g
nal cable to the 15-pin, D-sub connector on the back of
y
our monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adaptor.
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
Connecting Your Monitor
(SyncMaster 151N/150N/152N/153N)