Samsung 192V Computer Monitor User Manual


 
English > Main > Setup > Connecting Your Monitor
Connecting
Your Monitor
Installing the
Monitor Driver
Installing VESA
compliant mounting
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. Connect the monitor to the Macintosh computer using the D-SUB connection cable.
4. In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adaptor.
5. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
SyncMaster 153V/173V/152V/172V/193V/192V