Filter
Top Products
3-5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal
on the RF (A/B) switch.
3-6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN
terminal on the rear of the set.
After you have made this connection, set the A/B switch to the "A" position for normal viewing. Set the A/B
switch to the "B" position to view scrambled channels. (When you set the A/B switch to "B", you will need
to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)
3. Connecting Other Devices
1. Connecting DVD/DTV Set Top Box
Connect to the DVD/DTV Set Top Box input if the device has a
[COMPONENT IN]
connector.
You can watch Component simply by hooking up the Component with the monitor as long as the
power is on.
1. Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the
[R-AUDIO-L]
port of the
monitor.
2. Connect the VIDEO OUT port of the DVD / DTV Set-Top Box to the
[P
R
, P
B
,Y]
input ports using a
component video cable (P
R, PB,Y).
Select "Component" using the ' '.
If you connect the PR, PB, and Y component cables to the incorrect terminals, the screen will be
displayed in red or blue.
For single-family houses, install an UHF antenna to receive digital broadcasting.