Multi Control
Available Modes
•
PC / DVI
•
AV
•
HDMI
•
MagicInfo
Multi Control
Assigns an individual ID to the SET.
MENU → → → → → ENTER → [Multi Control ] → ENTER
→ , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds
to the transmitter setting becomes activated.
MagicInfo
Available Modes
•
PC / DVI
•
AV
•
HDMI
•
MagicInfo
Note
• For MagicInfo, a remote control is available for MagicInfo. However, it is recommended using
a separate USB keyboard.
• For MagicInfo in Device mode, moving external devices while booting may cause errors. Set up
external devices only if the LCD Display turns on.
Adjusting the LCD Display
71