Filter
Top Products
21
English
Screen is blank and
power indicator light is
steady amber or blinks
every 0.5 or 1 seconds.
■
The monitor is using its power
management system.
■
Move the computer’s mouse or
press a key on the keyboard.
PowerSaver,
page 19.
Image is not stable and
may appear to vibrate.
■
Check that the display resolution
and frequency from your PC or video
board is an available mode for your
monitor. On your computer check:
Control Panel, Display, Settings.
Display Mode,
page 17.
Display Modes,
page 26.
■
If the setting is not correct, use your
computer utility program to change
the display settings.
Installing the Video
Driver, page 7.
NOTE: Your monitor supports multiscan display functions
within the following frequency domain:
■
Horizontal frequency:
■
Vertical frequency:
■
Maximum refresh rate:
30 kHz ~ 61 kHz
50 Hz ~ 75 Hz
1024 x 768 @ 75 Hz
Image is not centered
on the screen.
■
Adjust the horizontal and vertical
position.
H-Position, page 14.
V-Position, page 14.
You need the monitor
driver software.
■
Download the driver from the internet at:
http://www.samsung-monitor.com
http://www.samsungmonitor.com (USA only)
Table 5. Troubleshooting problems – Image (
Continued
)
What you see... Suggested Action Reference
Appendix
4_E570S580Sbody.fm Page 21 Monday, July 16, 2001 2:53 PM