Filter
Top Products
Question
Answer
How can I change the
frequency?
Frequency can be changed by reconfiguring the video card.
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the
Control
Panel Display Settings
.
* Contact the video card manufacturer for details.
How can I set the Power Saving
function?
Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
computer or the screen saver. (Refer to Windows/Computer
Manual).
The monitor makes a sound
when it is turned on.
This is normal as some sound may be generated when the metal
case and the electromagnet, which are installed to block any
electromagnetic waves, interact with each other.
How can I clean the outer
case/Picture tube?
Disconnect the power cord and then clean the monitor with a soft
cloth, using either a cleaning solution or plain water.
Do not leave any remains of the detergent nor scratch the case.
Do not allow any water to go inside the monitor.
Highlight Zone III Q & A
Question
Answer
The program does not function
properly.
Highlight Zone III features a combination of circuitry and software
built on proprietary technology of SEC. Therefore, the Highlight
Zone III feature is found only on SEC monitors that support the
feature.
Check if your monitor supports the Highlight Zone III feature.
If not, the Highlight Zone III icon will show a message saying, "No
Connection" ( )Connect the monitor properly before using it.
Neither Automatic Detect or nor Manual Detect function while the
icon shows the message, "No Connection". You can only exit the
program.
Started a multimedia program
but the Highlight Zone function
does not automatically activate.
Check the Highlight Zone III menu and see if Disable Auto Detect
is selected.
When selected, the Highlight Zone function is not automatically
activated.
The function may not be activated automatically for some
multimedia programs.
In this case, use Manual Detect instead.
See Manual Detect under (Highlight Zone III)
Check the color settings and see if sRGB is selected.
When sRGB is selected, the Highlight Zone III function remains
de-activated in order to maintain the sRGB color attributes..
* Contact the video card manufacturer for details.
Changed the setting to Highlight
Zone in Manual Detect mode
but the Highlight Zone feature
has not been activated
Check the color setting of the monitor and see if sRGB is
selected.
When sRGB is selected, the Highlight Zone function remains de-
activated in order to maintain the sRGB color attributes.
Some of the windows may not be selected when Highlight Zone
function is on.
Want to turn the Auto Detect
function off.
Set Disable Auto Detect to off from the Highlight Zone III menu.
See (Highlight Zone III functions)