Filter
Top Products
If this is the case, adjust the Brightness and Contrast by using the
OSD menu.
3. Power button [ ] /
Power indicator
Use this button for turn the monitor on and off./
This light glows green during normal operation, and blinks green once as
the monitor saves your adjustments.
4. Volume button [ ]
When OSD is not on the screen, push the button to adjust volume.
2,4. Adjust buttons [ ]
Use this button for navigate and select menus or adjust the menu items
in the menu screen.
5. Enter button [ ]/
Auto button
Activate a highlighted menu item. /
Use this button for auto adjustment direct access.
See PowerSaver described in the manual for further information regarding power saving functions.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it
unattended for long periods.
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. Power port Connect the power cord for your monitor to the power port on the back of
the monitor.
2. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back of your
monitor.