Filter
Top Products
77
Setup and Reset
7
7 Setup and Reset
7.1.4 Analog
You can view the Analog cable connection status between the product and a PC.
z The connection status will be shown even when the input source is not Analog mode.
z Selecting the Analog option when an analog cable is connected will automatically change the input
source to Analog mode.
Configuring Analog
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating
that an analog cable is connected or disconnected.
4 If an analog cable is connected, press [ ] to move to Analog and press [ ]. The input source
will automatically switch to Analog mode.
MENU
ࢇࢷ֩Ѝ ۴ࢇѰ
HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
Disconnected
Connected
Off
Disconnected
Disconnected
- - - - - - - - - - - - - - - - -
ࢇࢷ֩Ѝ ࣏ࢽ
۴
AUTO