Filter
Top Products
44
Using "Central Station"
2
2 Using "Central Station"
Static IP User
1 Set the LAN network for the notebook PC to Do not use.
2 Go to Control Panel Network and Internet Network and Sharing Center Change
adapter settings. Next, right-click on the notebook PC’s network device and select Do not use.
3 Right-click on the Central Station monitor’s network device (marked “LAN9512/LAN9514 USB 2.0
to Ethernet 10/100 Adapter #7”), and select Use.
Be sure to perform this process before configuring the IP.
4 Configure the static IP. Assign the static IP that is allotted to the Central Station monitor’s network
device.
Go to Control Panel Network and Internet Network and Sharing Center Change
adapter settings. Next, right-click on the Central Station monitor’s network device (marked
“LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”), select Properties Internet
Protocol Version 4 (TCP/IPv4) Properties, and configure the static IP and DNS settings.