3-5 Using the product
SETUP&RESET
Menu Description
H-Position Moves the position of the display area on the screen horizontally.
This function is only available in analog mode.
V-Position Moves the position of the display area on the screen vertically.
This function is only available in analog mode.
Image Size PC signals
• <Auto> - The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
• A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether
the <Image Size> is set to <Auto> or <Wide>.
AV signals
• <4 : 3> - Displays pictures at the 4 : 3 aspect ratio.
• <16 : 9> - Displays pictures at the 16 :9 aspect ratio.
• <Screen Fit> - If a 480P, 576P or 720P(F2080) / 480P,576P,720P or 1080P(F2380) signal is
input in DVI input mode, the picture is displayed as is without truncation.
• This can only be set when the external input is connected through DVI and <PC/AV Mode>
is set to <AV>.
Menu H-Position You can adjust the horizontal position of the OSD.
Menu V-Position You can adjust the vertical position of the OSD.
Menu Description
Reset Use this function to restore the visual quality and color settings to the factory defaults.
• <No> - <Yes>
Menu Transparency You can select the transparency of the OSD.
• <Off> - <On>
Language Select a language for the OSD.
The selected language is only applied to the product OSD. This setting does not affect the other
functions of the PC.