Filter
Top Products
DRIVE CONFIGURATION
Interface ATA 6
Bytes per Sector 512
Buffer DRAM Size
1
2/8 Mbytes
PERFORMANCE SPECIFICATIONS
Read Seek Time (typical)
-Track to track 0.8 ms
-Average 8.9 ms
-Full Stroke 18.0 ms
-Average Latency 4.17 ms
-Rotational Speed 7,200 rpm
Data Transfer Rate
-Media to/from Buffer(max.) 840 Mbits/s
-Buffer to/from Host(max.) 133 Mbytes/s
Drive Ready Time(typical) 7 sec
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error 1 sector in 10
14
bits
MTBF(POH) 500,000 POH
Start/Stop Cycles 50,000
Component Design Life 5 years
ACOUSTICS (AVERAGE SOUND POWER)
-Idle 2.7 Bel
-Random Read/Write 2.8 Bel
ENVIRONMENTAL SPECIFICATIONS
Temperature
-Operating 5~55°C
-Non-operating -40~70°C
-Thermal Gradient (max.) 20°C/hr
Humidity (non-condensing)
-Operating 5~90%
-Non-operating 5~95%
Linear Shock (1/2 sine pulse)
-Operating, 2ms 63 G
-Non-operating, 2ms 350 G
Vibration (swept sine, 1 octave per minute)
Operating
5 ~ 21 Hz 0.034" (double amplitude)
21 ~ 300 Hz 1.5 Gp-p
Non-operating
5 ~ 21 Hz 0.195" (double amplitude)
21 ~ 500 Hz 8 Gp-p
Altitude (relative to sea level)
-Operating -1,000 to 10,000 feet
-Non-operating -1,000 to 40,000 feet
POWER REQUIREMENTS
Voltage 5V° 5% / 12V° 10%
Spin Up Current(max.) 780 / 2250 mA
Read/Write On-Track(typ.) 8.0 W
Seek(typ.)
2
9.0 W
Idle(typ.) 7.2 W
Standby(typ.) 0.4 W
Sleep(typ.) 0.4 W
PHYSICAL DIMENSION
Height 1 inch
Width 4 inches
Depth 5.75 inches
Weight 1.45 pounds
Spinpoint P80 series
• 80GB Formatted Capacity Per Disk
• Ultra ATA-133 Compatible
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor
(DSP) Based Architecture
• ATA S.M.A.R.T. Compliant
• ATA Security Mode Feature Set
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set (Optional)
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• NoiseGuard™
• SilentSeek™
• ImpacGuard™
80.0/120.0/160.0GB
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
1. 128 KB is used for firmware
2. 30% duty cycle, random seek
Capacity
1
Model
2MB
8MB
80GB
SP0842N
120GB
SP1243N
SP1253N
160GB
SP1644N
SP1654N
1MB = 1,000,000 Bytes. 1GB = 1,000,000,000 Bytes
*Notes:Design and specifications are subject to change
without prior notice