Samsung HD501LJ Computer Drive User Manual


 
Spinpoint T133S series
• Serial ATA 3.0 Compliant
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor (DSP) Based Architecture
• ATA S.M.A.R.T. Compliant
• ATA Security Mode Feature Set
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set
3
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• NoiseGuard™
• SilentSeek™
300.0/400.0GB
Capacity
1
Model
SATA,8MB
300GB
HD300LJ
400GB
HD400LJ
DRIVE CONFIGURATION
Interface Serial ATA 3.0
Bytes per Sector 512
Buffer DRAM Size
2
8 MB
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track 0.8 ms
-Average 8.9 ms
-Full Stroke 18 ms
-Average Latency 4.17 ms
-Rotational Speed 7,200 rpm
Maximum Data Transfer Rate
-Media to/from Buffer(max.) 742/1000 Mbits/sec
-Buffer to/from Host 300 MB/sec
Drive Ready Time(typ.) 10 sec
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error 1 sector in 10
14
bits
MTBF 600,000 POH
Start/Stop Cycles(Ambient) 50,000
Component Design Life 5 years
ACOUSTICS (AVERAGE SOUND POWER)
-Idle 2.7 Bel
-Random Read/Write 2.9 Bel
ENVIRONMENTAL SPECIFICATIONS
Temperature
-Operating 0~60°C
-Non-operating -40~70°C
-Thermal Gradient (max.) 20°C/hr
Humidity (non-condensing)
-Operating 5~90 %
-Non-operating 5~95 %
Linear Shock (1/2 sine pulse)
-Operating, 2ms 63 G
-Non-operating, 2ms 300 G
Vibration (swept sine, 0.5 octave per minute)
Operating
5 - 300 - 5 Hz 1.0 G0-p
Non-operating
5 - 500 - 5 Hz 2.0 G0-p
Altitude (relative to sea level)
-Operating -1,000 to 10,000 feet
-Non-operating -1,000 to 40,000 feet
POWER REQUIREMENTS
Voltage +5V° 5% / +12V° 10%
Spin Up Current(max.) 880 / 2250 mA
Seek
4
(typ.) 9.4
5
W
Read on-Track(typ.) 8.7
5
W
Idle(typ.) 7.2
5
W
Standby(typ.) 0.6
5
W
Sleep(typ.) 0.6
5
W
PHYSICAL DIMENSION
Height 1 in
Width 4 in
Depth 5.75 in
Weight 1.44 lb
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. 128KB is used for firmware
3. For ATA-6 interface models only
4. 30% duty cycle, random seek
5. Power based on enabled DIPM and SATA 3.0Gbps speed
*Notes:Design and specifications are subject to change
without prior notice