Filter
Top Products
User’s Manual
STORY Station Series External Hard Drive
8
Installation
Figure 1. Connecting a STORY Station Series
Figure 2. Power on a STORY Station Series
Connecting your STORY Station Series
Verify that the computer meets the minimum system requirements as outlined in #System Requirements.
Connect the Data cable to your desktop/laptop computer as shown in the figure below.
To use the STORY Station 3.0 model at its Maximum speed, you need a PC or a Host Card that supports USB 3.0 interface.
Plug in the power adapter and connect the USB cable to the corresponding port on your desktop PC or notebook PC.
Turn the power on your drive with power dial.
Now you can enjoy your drive.
USB
STORY Station Series will not power on
when the USB Cable disconnected.
1
2
3
4
5