Samsung LD190G Computer Monitor User Manual


 
Adjusting the Monitor
Direct Functions
Note
The monitor LED displays for 10 seconds
Press the MENU button four times continuously to exit OSD
AUTO(Available in Analog mode only)
When no OSD is displayed,press”
” button to perform the AUTO function, the auto adjustment
screen appears as shown in the animated screen on the center.
Auto adjustment allows the monitor to self-adjust to the incoming Analog signal.
If auto adjustment does not work properly, press “
button again to adjust picture with
more accuracy.
If you change resolution in the control panel, auto function will be executed automatically.
Brightness
When no OSD is displayed,press” ” button to perform the Brightness function.
Toggle the Source
In
power saving mode, the power LED is blinking all the time, or in the Checksignal
menu,press”
/ ” buttons to perform the Source function.
OSD Function
Brightness
MagicBright Custom NotePC Internet Movie Dynamic
Contrast
Source Analog USB
Image Size Auto Wide