Filter
Top Products
CHAPTER 3: ONE-TIER CONFIGURATION 3
Chapter 3: One-Tier Configuration
Installation
1. Shut down and power OFF all computers to be connected to MasterConsole II.
2. Plug a keyboard, monitor, and mouse into the keyboard, monitor, and mouse ports on the
rear panel of the MasterConsole II.
Mouse Port
Monitor Port Keyboard Port
Figure 6 MasterConsole II Rear Panel
3. Power ON the MasterConsole II.
4. Using a universal cable kit (CCPTnn), plug the 25-pin connector into one of the numbered
channels on the MasterConsole II back panel.
5. Plug the cable's other connectors into the computer's keyboard, monitor, and mouse ports,
using the supplied adapters for AT style PCs.
Figure 7 One-Tier Configuration Cabling Detail