Filter
Top Products
From this point forward, you will be guided through driver
installation and printing documents.
The setup program is compatible with Windows 3.x and
Windows 95.
This Installation Guide describes only setup and printing
examples. To learn more details about the product, read
the Operator’s Guide supplied with the printer.
System Requirement
(Note that the ML-85G/85G plus printer does not support
switchbox connections.)
- IBM or compatible with 386 or higher processor
- Free disk space of at least 4Mb
- More than 8Mb RAM memory (16Mb recommended,
and note print speed will increase as system memory is
increased.)
Before Installation
Remove all other printer drivers before running Setup
program, or change the printer ports to ‘FILE’.
If not, printing operation may fail.
3
Connecting Computer
and Power Cables
- Be sure to remove power from both computer and printer.
1
Connect printer to computer.
•A printer cable is not included with the printer, and must be supplied by the
user.
• For best performance, use a good quality shielded cable with
IEEE 1284-compatible pin configuration (Centronics).
At temperatures below 50˚F (10˚C), apply
printer power at least an hour before
using.
• This will help maintain print quality.
• In winter time, it is recommended to keep
printer on (Power Save mode).
Installing Printer Driver and
Printing
4
2
Plug in the power cord.
• Note that this printer does not
have a power switch. It will
automatically shut off after a
period of non-use.
Note
01ML-85G/85G 99.2.18 12:2 PM ∆‰¿Ã¡ˆ8