Filter
Top Products
Questions and Answers 129
Wired LAN Related
Q1 The <Wake On LAN> function
A <Wake On LAN> is a function that activates the system from standby (S3) when a signal (such
as ping or magic packet commands) arrives from the network (wired LAN).
Using the <Wake On LAN> function
z Click on My Network Place> View network connections on the Desktop.
x Right-click(press and hold the Stylus Pen for more than 3 seconds) the Local Area Connec-
tion and click Properties.
c Click Configure, and select the Power Management tab. Select 'Allow this device to
bring the computer out of standby', then click OK. Restart the system.
- If the system in standby mode is activated when there is no received signal, use the system
after disabling the <Wake On LAN> function.
- When turning the power off when <Wake On LAN> is disabled, the LAN LED may continue
to be lit up.
- The <Wake On LAN> function operates only when the LAN is ON.
- Connecting a wired LAN while using a wireless LAN may not activate the <Wake On LAN>
function. Set the Wireless LAN to 'Disable' to use the <Wake On LAN> function.
z Click on My Network Place> View network connections on the Desktop.
x Right-click(press and hold the Stylus Pen for more than 3 seconds) over Wireless Net-
work Connection and select Disable.
Q2 When I am connected to a 100Mbps wired LAN and the computer exits standby/
hibernation mode, a message appears informing of a connection to a 10Mbps wired
LAN.
A When the computer exits standby/hibernate mode, restoring the network takes about 3 sec-
onds. When the network is restored, it operates at 100Mbps.
Q3 To use the network at the maximum data rate, configure the following options.
A Click Start > Control Panel > Performance and Maintenance > System > Hardware
> Device Manager > Network adapters and Right-click(press and hold the Stylus Pen for
more than 3 seconds) Marvell Yukon88E8036 PCI-E Fast Ethernet Controller and click
Properties > Advanced.
Configure as follows and click the OK button.
z BatteryModeLinkDetection : EnergyDetect™
x BatterySpeedSettings : FullSpeed