Filter
Top Products
9
USER MANUAL
MOUNTING GUIDE
Utility :
Recall - Select to reset all setting to the factory default values.
Lock - Select ON or OFF
(ON : Control key lock. OFF : Control key unlock)
Wall mountable using two methods:
1) Using the 200 mm pre-cut holes
2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD
monitor to the wall.
Exit : Turn off OSD Menu.
Monitor
Pad
Arm
Wall
8
USER MANUAL
OSD :
H. Position - Move the OSD position to right(
) or left( ).
V. Position - Move the OSD position to up(
) or down( ).
Transparency - Select the OSD background.
OSD Timer - Select the OSD display timing.
Language - Select a language among
English, Français, Deutsch, Español, Danish, Italiano.
Color (PC Mode) :
Color Temp - Adjust color temperature to 9300, 6500, user.
(note : 9300 is factory default)
Red - Adjust red color for user.
Green - Adjust green color for user.
Blue - Adjust blue color for user.
D-SUB CONNECTOR PIN ASSIGNMENTS
Pin 1 RED VIDEO Pin 9
Pin 2 GREEN VIDEO Pin10 SIGNAL CABLE DETECT
Pin 3 BLUE VIDEO Pin 11 GROUND
Pin 4 GROUND Pin 12 SAD(for DDC)
Pin 5 GROUND Pin 13 H-SYNC.(or H+V SYNC.)
Pin 6 RED GROUND Pin 14 V-SYNC
Pin 7 GREEN GROUND Pin 15 SLC(for DDC)
Pin 8 BLUE GROUND
1. POWER CORD 2. USER’S MANUAL 3. PC cable 4. Adaptor
5. Remote Control 6. Batteries 7. Wall mount (Option) 8. Rack mount (Option)
• PIN ASSIGNMENTS
• ACCESSORY
D-SUB