Filter
Top Products
9. PRE-CH
This button is used to return to the immediately previous channel.
10. CH
In TV mode, selects TV channels.
For more information, refer to Direct-Access Features > Channel
11. SOURCE
Push the button, Selects the Video source changes.
12. INFO
Shows a video source, current channel number, picture mode, sound mode, Caption On/Off and
V-chip On/Off on the upper right corner of the screen.
13. EXIT
Exits from the menu screen. Exits from the PIP screen.
14. Up-Down , Left-Right Buttons
Moves from one menu item to another horizontally, vertically or adjusts selected menu values.
15. P.MODE, M/B
When you press this button, current sound mode is displayed on the lower center of the screen.
TV / AV / S-Video / DTV Mode : P.MODE( Picture Mode )
Then push button again to circle through available preconfigured modes.
( Movie Dynamic Standard Custom )
PC / DVI Mode : M/B (MagicBright™)
Then push button again to circle through available preconfigured modes.
( Text Internet Entertain Custom )
16. STILL
When you press this button, current sound mode is displayed on the lower center of the screen.
Press the button once to freeze the screen. Press it again to unfreeze.
17. BBE (Barcus-Berry Electronics)
Recreates the natural sound and improves sound clarity through boosting high and low range
frequencies. As a result high sounds are clearer, brilliant and finely detailed while low sounds are
tight, well-defined and harmonically rich.
18. MTS
You can select the MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo
Mono Mono
Manual Change
Stereo
Mono Stereo
SAP
Mono SAP
Mono
19. PIP
Push the PIP button to PIP screen ON.
20. SOURCE
Push the button, the PIP window's signal source changes.
21. SIZE
Adjusts the PIP image size in PIP mode.
22. SWAP
Swapping the contents of the PIP and main image. The image in the PIP window will appear on
the main screen, and the main screen image will appear in the PIP window.
User Controls