Filter
Top Products
2. Make a little gap between stand assembly and
Rear Cover with a ÔÐÕ screw driver. And pry
Rear Cover off stand assembly with the finger.
3. Remove the 10 screws from the stand
assembly.
4. Remvoe the hinge, neck front, PCB, signal
cable.
5. Remove the screw and washer on the base of
the stand.
6. Remove the Stand Base and Stand Top.
5 Disassembly and Reassembly
SyncMaster 33*TFT/53*TFT 5-3
Figure 5-9
Figure 5-10
Figure 5-11