Filter
Top Products
Connecting the Monitor
[ RGB IN ]
2-2.
Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the D-sub connection cable.
2-3.
In the case of an old model Macintosh, you need to connect the monitor using a special Mac
adapter.
3.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
Using the Stand
SyncMaster 740N / 940N
1.
Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2-1.
Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.