Filter
Top Products
38
Troubleshooting
User’s Manual
1. Check if the power cord and the cable are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, request an after-service for the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver and the monitor driver.
4. Check if the scanning ratio of the video screen is set at 75Hz or 85Hz.
(Do not exceed 60Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter at the “Control Panel, System, Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.
Check the following items if there is trouble with the monitor.
Note If problems repeatedly occur, contact an authorized service center.