![](http://pdfasset.owneriq.net/9/62/962b701e-111c-fcd4-ed87-7f98769e0244/962b701e-111c-fcd4-ed87-7f98769e0244-bg10.png)
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.
Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
2-2. Connected to a Macintosh.
Connect the monitor to the Macintosh computer using the D-SUB connection cable.
2-3. In the case of an old model Macintosh, you need to connect the monitor using a special Mac adaptor.
3. Turn on your computer and monitor. If your monitor displays an image, installation is complete.
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N / 913N / 515V / 915V