Filter
Top Products
6.2 <
Scanning>
Setting scan information in Samsung Scan
Manager
You can find out about Samsung Scan Manager program information
and installed scan driver's condition. Also, you can change scan settings
and add or delete the folders where scanned documents to computer are
save in Samsung Scan Manager program.
Note
Scan Manager program can only be used in the Window and
Macintosh system. If you use the Macintosh, See Software
section.
1 Press Start > Control Panel > Samsung Scan Manager.
Samsung Scan Manager Administration appears.
Note
You can open Samsung Scan Manager by pressing the Smart
Panel icon's right in the window task bar.
2 Select the appropriate machine from the Samsung Scan Manager.
3 Press Properties.
4 Set Scan Button allows you to change the saving destination and
scan settings, add or delete application program and format files.
You can change the scanning machine by using Change Port.
(Local or Network)
5 Press OK after setting is done.