Filter
Top Products
appendix
28_ appendix
TROUBLESHOOTING
Problem Solution
No video is displayed.
Check if the resolution of the output device matches with the presenter.
Ex) If the projector’s highest video mode is SVGA and the presenter’s output resolution has
been set to XGA or SXGA, no image will be displayed on the screen.
y
Check if the output device has set a proper input source.
y
Check if brightness and focus are adjusted properly.
y
Check if video cable is properly connected to output port.
y
Check if the OUTPUT MODE is set to VGA / USB.
Displayed screen is out of focus.
y
Check if the subject is too close to the lens module.
USB communication with the PC
fails.
y
Check if the SDP program is installed on your PC properly.
y
Check if the operating system is Windows XP or Mac OS X 10.5.8 or later. A lower
version of Windows may cause a trouble.
y
For further information, refer to the software user’s manual (for Windows / Macintosh)
provided with the product.