Filter
Top Products
bright. As the brightness of the lamp increases, the lamp lifetime can be reduced and
the noise and power consumption may increase.
V-Keystone If video scenes are distorted or tilted, you can compensate for this using the vertical Keystone
function.
▶ The sound output of your projector is temporarily stopped while the keystone is
being changed.
▶ The keystone is not compensated for in the On Screen Display (OSD).
Background You can set the Background that is displayed when there is no signal from the external device
connected to the projector.If a signal is received, the Background you set disappears and a
normal screen is displayed.
1) Logo
2) Blue
3) Black
Test Pattern Generated by the projector itself. Utilized as standard to optimize the installation of the
projector.
1) Crosshatch : You can check whether the picture is distorted or not.
2) Screen Size : You can refer to picture format sizes such as 1.33:1 or 1.78:1.
Crosshatch
Screen
Size
Video Type Allows you to set the type of input signal when your projector fails to determine this
automatically in PC mode.
▶
In [PC] mode, this is only enabled if the input signal is AV Timing(D-Sub).
However, for a separate H/V sync., this is only enabled for 1280 x 720p 59.94
Hz/60 Hz signals.
1) Auto
2) RGB(PC)
3) RGB(AV)
4) YPbPr(AV)
Usage
Color,
Sharpness,Tint
PC menu and
zoom
RGB(PC)
When connecting the RGB output of a PC
to the D-Sub terminal
Disable Enable
RGB(AV)
When connecting the RGB output of an
A
V device (STB, DVD, etc…) to the D-
Sub terminal
Enable Enable
YPbPr(AV)
When connecting the YPbPr output of an
A
V device (STB, DVD, etc…) to the D-
Sub terminal
Enable Disable
Auto
A
uto settings - -
Reset Using this function, you can reset various settings to the factory default settings.
1) Factory Default : Changes the settings to the factory defaults.
2) Reset Filter Time : Resets the filter time.
Factory
Default
Reset Filter
Time
|
Basic Functions
|
Input
|
Picture
|
Setup
|
Option
|