Filter
Top Products
3-5 Using
Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type auto-
matically in <PC> or <HDMI> mode, Video Type lets you manually set the input signal.
• In <PC> mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V
sync, it is only enabled for a 1280 x 720p 59.94Hz/60Hz signal.
• <Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)>
• In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59.94Hz/60 Hz and 1280x720p
59.94Hz/60 Hz signals.
• <Auto>-<PC>-<AV>
Caption The <Caption> function is supported when the external analog signal from the Video input contains
subtitles.
• <Caption> : <Off>-<On>
• <Mode> : <Caption>-<Text>
• <Channel> : <1>-<2>
• <Field> : <1>-<2>
• The <Caption> function will not operate in <PC> (including Component) or <HDMI> mode.
• Depending on the external signal, a change to the channel or <Field> settings may be
required.
• Each <Channel> and <Field> contains different information. <Field><2> carries additional
information to supplement information contained in <Field><1>.
(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided
on <Channel><2>.)
Reset Using this function, you can reset various settings to the factory default settings.
• <Factory Default> : Changes the settings to the factory defaults.
• <Reset Filter Time> : Resets the filter time.
MENU DESCRIPTION