Filter
Top Products
Rev. 1.01
- 12 -
SPP-R200
3. Installation & Usage
3-1 Battery Installation
1) Insert the battery on the rear side of the
printer, aligning the battery hook
properly.
2) Push the battery into the slot until a
snapping sound is heard.
NOTE
As the battery is not charged at the time of
purchase, charge the battery prior to product
use.
(Use the battery charger and/or the optional
battery holder.)
3-2 Battery Charging
1) Turn off the printer power.
2) Connect the power cord② to the battery
charger ①.
3) Connect the battery charger ① to the
power connector of the printer.
4) Plug the power cord② into an electrical
outlet.
CAUTION
The printer may incur serious damage if the battery
charger provided by BIXOLON is not used. BIXOLON
is not legally liable for any such damages. (The voltage
and electrical current specifications of the printer and
battery charger must match.)
①
②