Filter
Top Products
Chapter 4. Setting the DIP switches
The DIP switches are located on the bottom of the printer. The DIP switches are used to
set the printer to perform various functions. Follow these steps when changing DIP switch
settings :
1. Turn the printer power switch off.
2. Turn the printer over and remove the dip switch cover.
3. Move the DIP switches using tweezers or another narrow-ended tool.
Switches are on when up and off when down in the figure below.
4. The new setting takes effect when you turn on the printer.
NOTE : Always change DIP switch settings when the printer is turned off.
Changes made with the power on have no effect until you turn the
printer off and then on again.