Filter
Top Products
14
Chapter 4. Setting the DIP Switches
CAUTION
Turn off the printer while setting the DIP switch to prevent an electrical short, which
can damage the printer.
You can change your interface and printer density settings by changing the DIP
switch setting.
1. Make sure the printer is turned off.
2. There are a switch. Notice that ON is marked on each set of switches.
Use tweezers or another narrow tool to move the switches.
1
3. Use the following tables to set the DIP switches.
15
DIP Switch Functions
BPS
SW1 SW2 SW3 Default
2400 bps On Off Off
4800 bps Off On Off
9600 bps Off Off On
19200 bps On Off On
38400 bps On On Off
57600 bps Off On On
115200 bps On On On
9600
SW
Function On Off Default
SW4 Density Dark Normal Normal
SW5 Handshaking Xon/Xoff RTS/CTS RTS/CTS
(DTR/DSR)
SW8
Firmware
Download
Download Printing Printing
SW7 SW6
Language CPL
Default
On 24
On English
Off 32
On Johap
Off Korean
Off Wansung
English
32CPL