Filter
Top Products
User’s Manual
Setup
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the DVI-D signal cable to the DVI-D connector on the back of your monitor. Connect
the other end of the cable to the video port on the back of your workstation.
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
Note
:
1.
Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
2. Perform the auto adjustment procedure as described in Auto Adjustment.
Connecting Your Monitor