Samsung 720XT Computer Monitor User Manual


 
Server Requirement
Connect Client No CPU RAM Ethernet OS
Minimum
SPEC
Just can load Server
Program
P3 400MHz 64Mbyte 100Mbps
windows 2003
Server
Recommend
SPEC
1 P4 1.0GHz 256Mbyte
100Mbps
windows 2003
Server
2~4 P4 2.4GHz 512Mbyte
5~7 P4 3.0GHz 1Gbyte
8~10 P4 3.2GHz 2Gbyte
The content presented above is the result of testing a specific server. The information may change as
the server may be different. For some products, the OS may not be supported. When purchasing a
product, make sure to check whether or not the OS is supported.
USB
Local Device (USB) Connection Speed
When booting up a monitor, a blank screen may appear for 3 ~ 4 seconds until the MagicNet screen
appears.
If you turn the monitor off while booting, it may damage the product.
Local Device (USB) compatibility
HID(Human Interface Devices) : Keyboard, Mouse
MSC(Mass Storage Class), Devices using the SCSI(Small Computer System Interface) command set,
FAT(File Allocation Table) System
Exception
Some manufacturers have wrongly specified their device to be USB standard compatible.
Our product has exception handling procedures.
But Some devices are unlikely to work properly.
Some manufacturers have wrongly specified their device to be SCSI compatible.
Such devices are unlikely to work properly.
It is recommended that USB devices are purchased after they are tested and confirmed to be
compatible.
PowerSaver
PowerSaver
(
When used as a normal monitor
)
This monitor has a built-in power management system called PowerSaver. This system saves energy
by switching your monitor into a low-power mode when it has not been used for a certain amount of
time. The monitor automatically returns to normal operation when you press a key on the keyboard.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended
for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed
in your computer. Use a software utility installed on your computer to set up this feature.
State Normal Operation Power saving mode
Power off
(Power button)
Power Indicator Green Green, Blinking Black