Filter
Top Products
English 4
Connecting Your Monitor & Speakers
Caution
: Turn the power off to the monitor, computer and speakers before connecting or
disconnecting the speakers.
1
Signal cable
Connect the end of the signal cable to
your computer’s video port. If you are
using a Macintosh computer, connect
the cable to a Macintosh adapter, and
set the pins on your adapter (adapter
not included). A PC-compatible
computer does not need an adapter.
2
Stereo input cable
Connect this cable to your sound card
or computer
3
DC input cable
Connect this cable to DC output port
on the back of your monitor.
4
Left output cable
Connect this cable to L- input port on
the back of the left side speaker.
5
L-input port
Connect the left output cable from
right speaker here.
6
Power port
Connect the power cord for your
monitor to the power port on the back
of the monitor.
7
DC output port
Connect DC input cable here.
8
Power cords
Plug the power cord for the monitor
and the power cord for your computer
into a nearby outlet.
9
Turn on your computer and monitor.
If your monitor displays an image,
installation is complete.
10
Install the monitor driver
•
Ins
ert the provided diskette into the
A drive.
•
Double click the “install.exe” file.
Your New Monitor
750ST(E)TOC.book Page 4 Friday, January 28, 2000 4:00 PM