Filter
Top Products
The calibrated values will now be shown. Verify the values, and click the Save button to
save the settings.
Type in a name for the profile and click the OK button.
Y
ou will be asked whether to save the calibrated settin
g
s to your monitor. To save them,
click the OK button. It takes some time to save these settin
g
s. The calibrated settin
g
s saved
on the monitor are saved as the calibration mode which constitutes a part of the color mode
of your monitor. From now on, your monitor will use the saved settin
g
s whenever calibration
mode is selected.
When finished, click the Cancel button.
When exiting the program after saving the changed settings as the calibration mode, the
color mode of your monitor will change to the just saved current calibration mode. If the
program is not exited normally because communication to the monitor is disconnected, the
“
Color Calibration” message will appear when pressing the OSD. If this occurs, run the
program again and exit it normally.
| Calibration | Emulation | Uniformity | Miscellaneous |
Emulation