Sanyo CE32LM4WPR-E Computer Monitor User Manual


 
6
Screen mode selector
To select the screen mode, Auto, Natural, Full
Zoom 16:9, Title 16:9,Zoom 14:9,title 14:9 or Normal.
Refer to page 11
TV/AV switch
To switch from TV, AV1, RGB, AV2, AV3, PC or HDMI mode
press repeatedly. Press and hold in a few seconds, an AV selection
bar appaers. Select the mode you require using the
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons in analogue
and digital. For selection of programme position
10 - 99, for example 23, first press -/-- button
and press 2 and 3 numeric buttons.
F/OK
To save the setting in the menu.
MENU
To enter and exit sub menus. Also see page
Picture mode selection
Press the button repeatedly to select the following
picture modes.
Personal - Personal preference mode.
Dynamic - Suitable for brightly lit rooms.
Standard - Normal viewing mode.
Eco - Suitable for dimlt lit rooms and gives a
cinema - like effect.
Programme up and down
To select the next programme number or
previous programme number.
CS button
Press button to scan through all available channels
and back to the original channel.
Cursors up/down
To adjust the menu levels .
Teletext/TV selector
To access this feature press the TXT/TV button the
picture changes from TV - TXT - MIX and back to TV.
Standby
To switch the TV on and off. Also see page
Programme information call
To display the programme information.
You can also select colour systems in AV mode as follows
AUTO -> PAL -> SECAM -> NTSC3.58
Programme swap
To switch between current and previous
programme position watched.
Time display
In the TV mode, if the teletext is available
the teletext clock will be displayed on the
screen. Press again to cancel.
JXPLA
keys
REMOTE CONTROL
REMOTE CONTROL
GB
GB