Sanyo CE32LM5R Computer Monitor User Manual


 
11
Common specification
Power source 100~240V 50Hz/ 60Hz
Colour system PAL NTSC3.58 ,SECAM
AV terminal
AV1: Scart CENELEC Standard
Input: Composite video, RGB (5V RGB with 5V sync to
pin 14) and audio-L/R
Output: Composite video, audio L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio In (DVI/AV2): Cinch L/R
Audio Monitor.Out: CINCH L/R
Audio Speaker out: 2 x 6W
DVI Input : DVI-D GROUP Standard
PC Input: Mini D-SUB 15 PIN and
Audio in 3.5mm jack
Contrast Ratio 1500:1
Screen(inches/ cm) 32” / 81 cm
(viewing measured
diagonally)
Display Native Resolution 1366 x 768 (WXGA)
Viewing angles H:176°, V:176°
Dimensions (WxHxDmm) 803 X 493 X 150
Weight (kg) 20.5
NO PICTURE, NO SOUND
Check if monitor is plugged in.
Check monitor is not in standby mode.
POOR PICTURE, SOUND OK
Adjust BRIGHTNESS/ CONTRAST LEVELS (too low).
NO COLOUR, PICTURE OK
Adjust COLOUR control.
Check lead connections.
Does the signal input have colour.
REMOTE CONTROL DOES NOT WORK
Check batteries are inserted correctly.
Check condition of batteries.
Check to see if remote control inhibit is set ON.
PICTURE OK, NO SOUND
Check external speakers are connected correctly.
Check lead connections to external equipment.
Volume turned down or mute selected.
SPECIFICA
SPECIFICA
TIONS / HELPFUL
TIONS / HELPFUL
HINTS
HINTS
GB
GB
Specification
Helpful hints