Sanyo PLC-SU51 Projector User Manual


 
25
Basic Operation
Basic Operation
Press the FREEZE button on the remote control to freeze the
picture on the screen. To cancel FREEZE, press the FREEZE
button again or press any other button. (p11)
If a projected picture still has keystone distortion after pressing the AUTO SETUP button on the top control or the AUTO
SET on the remote control, correct the image manually as follows:
The arrows are white when there is no correction.
The arrows disappear at the maximum correction.
The direction of the arrow being corrected turns red.
If you press the KEYSTONE button on the top control
or on the remote control once more while the
keystone dialog box is being displayed, the keystone
adjustment will be canceled.
1
Press the KEYSTONE button on the remote control or select
Keystone in the Setting Menu (p42). The keystone dialog
box appears.
2
Correct keystone distortion by pressing the Point
eedd
78
button.
Keystone adjustment can be memorized. (p42)
Reduce the upper width
with Point
ee
button.
Reduce the lower width
with Point
dd
button.
Reduce the left part with
Point 7 button.
Reduce the right part with
Point 8 button.
Press the NO SHOW button on the remote control to black out the
image. To restore to normal, press the NO SHOW button again or
press any other button. When a projected image is captured and
set as “User” in the Logo item in the Setting Menu (p44), the
screen changes each time you press the NO SHOW button as
follows.
The message disappears after 4 seconds.
black out the captured image normal
• • • • •
No Show Function
Picture Freeze Function
Keystone Adjustment