Sanyo PLC-XP50 Projector User Manual


 
38
SETTING
Anamorphic
Display
This function decides whether to display On-Screen Displays.
On ··· shows all the On-Screen Displays.
Off ···· sets On-Screen Displays disappeared except;
ON-SCREEN MENU
Power off? message
P-TIMER
No signal message
Wait a moment message
Blue back
When this function is On, this projector will produce a blue image
instead of the video noise on the screen when any input source is
unplugged or turned off.
Logo
When this function is On, projector displays logo when starting up.
Menu position
Ceiling
When this function is On, picture is top / bottom and left / right
reversed. This function is used to project the image from a ceiling
mounting the projector.
Rear
When this function is On, picture is left / right reversed. This
function is used to project the image to a rear projection screen.
Ceiling function
Rear function
Press SELECT button at this icon
to display other items.
Press SELECT button at this icon
to display previous items.
When this function is On, the screen image is forcibly changed to a
4:3 image, even if the input signal is HDTV.
This function is used to adjust the on-screen menu display position.
When a SELECT button is pressed, the adjustment screen is
displayed (arrows appear). Use the POINT UP/DOWN/LEFT/RIGHT
button(s) to adjust the position. After making the adjustment, press a
SELECT button to return to the Menu screen.