Filter
Top Products
30
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTER button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Press the MENU button to display the On-Screen
Menu. Use the Point 7 8 buttons to move the red
frame pointer to the Input Menu icon.
1
Input Menu
Use the Point ed buttons to move the red arrow
pointer to either Computer 1 (Analog) or Computer 2,
and then press the SELECT button.
2
When selecting Computer 1 (Analog), RGB input
source will be selected directly.
When selecting Computer 2, the Source Select Menu
appears. Move the pointer to RGB and then press the
SELECT button.
3
Computer 1 (Analog)
Video
Computer 2
Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )
Computer Input
Move the pointer (red
arrow) to Computer 1
(Analog) and press the
SELECT button.
Input Menu icon
COMPUTER button
✔Notes:
•Wired, Wireless, and Memory viewer are for the Network function.
See owner’s manual “Network Set-up and Operation” and owner’s
manual of Memory viewer (optionally available).
•When the Input Search function is set to “On1” or “On2”, the
input signal will be searched automatically (p.51).
Move the pointer
(red arrow) to RGB.
Move the pointer (red
arrow) to Computer 2
and press the SELECT
button.
Input Menu icon
Computer
2
Wired
Top Control
INPUT button
Computer 1 (Digital)
Remote Control
Computer 1 (Analog)
Computer 2
Computer 1 (Digital)
Direct Operation
Menu Operation
Input Menu