Filter
Top Products
Section 3: Basic Specifications
CG4 Series Quick Guide Page 3-3
Ribbon size
Ribbon type
Ribbon winding
direction
- Length: 328.08 feet; 100 m
Width: 3.94 in. +/_0.02 in.; 110 +/-0.5
mm
Outer diameter: Maximum ø1.5 in.;
ø38 mm
(Inner diameter of ribbon core: ø0.50
in; ø12.7 mm)
Winding direction: Face out
Ribbon winding method: Ribbon core
winding method
* We recommend use of carbon ribbon
manufactured or specified by SATO.
Label issuing
mode
Standard: Continuous mode, Tear off mode, Sensor-off mode
Option: Dispenser mode, Cutter mode, Linerless mode
Dimensions 7.05 (W) x 9.37 (D) x 6.81 (H) in.
179 (W) x 2238 (D) x 173 (H) mm
*Excluding the protrusion portion.
Weight 3.75 pounds; 1.7 kg 4.19 pounds; 1.9 kg
Power specifica-
tions
AC adapter
Input power voltage: AC 100V to 240V +/-10% (full range)
Frequency: 50/60Hz
Output power voltage: DC 19V
Power consumption
Input power voltage conditions: AC 100V
At peak: 50 W (at 30% printing ratio)
During standby: 2.5W
Environmental
conditions (tem-
perature and
humidity)
Operating environment: 39.2 to 100.4°F; 4 to 38°C; 30 to 80% RH (However, no
condensation)
Storage environment: 14.0 to 140°F; -10 to 60°C; 15 to 85% RH (However, no
condensation)
(Not including ribbon, labels, and other supplies)
Interface Select one of the following (The factory will provide the unit with the selected
interface.)
1. USB (B type) and RS-232C (D-SUB 9-pin)
2. USB (B type) and LAN (10 BASE-T/100 BASE-TX auto switching)
3. USB (B type) and IEEE1284
Options Cutter unit, Dispenser unit (with dispenser paper sensor), RTC kit,
Non-cutter unit for linerless label, Simplified input Keypad, TSC Smart Keyboard,
1D barcode scanner
LED 1. Error: (Red)
2. ON LINE (POWER): (Green)
Operation button [POWER], [FEED/LINE]
Paper length
detection sensor
I-mark sensor (Reflective type)
Label gap sensor (Transmissive type)
Model name CG408 DT CG412 TT CG408 TT CG412 TT