Filter
Top Products
Unit 3: Installation
SATO HT200e Operator Manual PN 9001103B Page 3-6
ACCESSORIES INSTALLATION
There are several optional accessories that are available to make the HT200e printer more
useful in certain applications.
• Battery Power Module
• PCMCIA Memory Card
• Scanner
BATTERY POWER MODULE
The optional Battery Power Module attaches to bottom of the printer the same as the included
AC Power Module. To charge the battery pack, simply power off the printer and withdraw it from
the underside.
1 Remove AC Power Module (Figure 3-4a).
2 Insert Battery Power Module in its place (Figure 3-4b).
3 Power on printer to operate. Power off to remove battery pack for charging (Figure 3-4c).
To Charge Battery Pack
4 Connect charger to power receptacle (Figure 3-4d).
5 Insert battery pack into the charger base (Figure 3-4e).
6 Charge until LED indicates charging is complete (Figure 3-4f).
Figure 3-4a Figure 3-4b Figure 3-4c
Figure 3-4d Figure 3-4e Figure 3-4f