Filter
Top Products
Basic Functions
25
2
Basic Functions
The following basic functions are ex-
plained in this section.
❖
❖❖
❖ Adjusting Copy Image Density
❖
❖❖
❖ Selecting an Original Type
Text and Photo
❖
❖❖
❖ Selecting Copy Paper
Auto Paper Select and Manual Pa-
per Select
❖
❖❖
❖ Auto Reduce/Enlarge
The machine can choose an appro-
priate reproduction ratio based on
the paper and original sizes you se-
lect.
Note
❒ You can select functions to be acti-
vated when System Reset is turned
on, when Energy Saver is turned
off, or after the machine is pow-
ered on. See P.62 “Copier Features”.
❒ You can change default settings for
basic functions. See P.62 “Settings
You Can Change with the User
Tools”.
Adjusting Copy Image Density
You can adjust the copy image densi-
ty to match your originals.
If you require darker or lighter cop-
ies, adjust the image density yourself.
A
Press the {
{{
{Lighter}
}}
} or {
{{
{Darker}
}}
} key
to adjust the image density.
Selecting an Original Type
There are two ways to match your
originals:
❖
❖❖
❖ Text
If you do not select either mode,
your originals will be scanned
with the settings suitable for text
originals (Text mode).
❖
❖❖
❖ Photo
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Note
❒ You can change the detailed set-
tings for Text and Photo each with
the User Tools. See P.62 “Settings
You Can Change with the User
Tools”.