Savin 2535/2535p All in One Printer User Manual


 
Setting Originals
31
2
Setting Originals
Limitation
Set originals after correction fluid
and ink has completely dried. Not
taking this precaution could mark
the exposure glass and cause
marks to be copied.
Note
Basically originals should be
aligned to the rear left corner.
However, some copy functions
may produce different results de-
pending on the direction of the
originals. For details, see the expla-
nations of each function.
Reference
P.19 Originals.
Setting Originals on the
Exposure Glass
A
Lift the platen cover or the docu-
ment feeder.
Important
Do not open the document feed-
er with a force. Otherwise, the
cover of the document feeder
might open or be damaged.
Note
Be sure to open the document
feeder by more than 30°. Other-
wise the original size might not
be detected correctly.
B
Set the original face down on the
exposure glass. The original
should be aligned to the rear left
corner.
1: Reference mark
2: Scale
Note
Start with the first page to be
copied.
C
Lower the platen cover or docu-
ment feeder.
AdonisC2_ENcopy122F_FM.book Page 31 Thursday, February 15, 2001 3:23 PM