Filter
Top Products
User Tools (Copier/Document Server Features)
98
5
General Features
1
/
5
❖
❖❖
❖ Auto Paper Select Priority
As a default setting, Auto Paper
Select is selected. You can cancel
this setting. ⇒ p.31 “Selecting
Copy Paper”
❖
❖❖
❖ Paper Display
You can choose whether the avail-
able paper trays/sizes are shown
on the initial display.
Note
❒ If you choose "Hide", the dis-
play is shown as below. When
[Auto Paper Select] is pressed, pa-
per sizes appear on the display.
❖
❖❖
❖ Original Type Display
You can choose whether the origi-
nal types are shown on the initial
display.
Note
❒ If you choose "Hide", the dis-
play is shown as below.
❖
❖❖
❖ Original Type Priority
You can select the type of originals
to be effective when the power is
turned on, reset or modes are
cleared.
❖
❖❖
❖ Original Photo Type Priority
When you select “Text/Photo” or
“Photo” in “Original Type Priori-
ty”, you can change the settings of
the selected original type.
❖
❖❖
❖ Auto Tray Switching
If you load paper of the same size
in two or more trays, the machine
automatically shifts to the other
tray when the first tray in use runs
out of paper (When Auto Paper Se-
lect Priority is“ON”). This function
is called "Auto Tray Switching".
This setting specifies whether to
use "Auto Tray Switching" or not.
Note
❒ [With image rotation] Use this to
copy with Auto Tray Switching.
❒ [Without image rotation] Only cop-
ies with Auto Tray Switching if
you load paper of the same size
and in the same direction in two
or more trays. If the paper is not
the same size or in the same di-
rection, copying is interrupted
and the message "Load paper."
is displayed.
❒ [OFF] When a paper tray runs
out of paper, copying is inter-
rupted and the message "Load
paper." is displayed.
UranosC1-ENcopyA_F1_FM.book Page 98 Friday, July 26, 2002 5:01 PM