Savin C7526dn Printer User Manual


  Open as PDF
of 4
 
Specifying a Network
Address
Press the
{{
{{
{
Menu
}}
}}
}
key.
AQC001S
YMCK
Select [Host Interface] using ,
{{
{{
{▼
}}
}}
} or
{{
{{
{▲
}}
}}
}, and then press the
{{
{{
{
OK
}}
}}
} key.
Select [Network] using
{{
{{
{▼
}}
}}
} or
{{
{{
{▲
}}
}}
}, and
then press the
{{
{{
{
OK
}}
}}
} key.
Select [Effective Protocol] using
{{
{{
{▼
}}
}}
} or
{{
{{
{▲
}}
}}
}, and then press the
{{
{{
{
OK
}}
}}
} key.
Select the network protocol using
{{
{{
{▼
}}
}}
}
or
{{
{{
{▲
}}
}}
}, and then press the
{{
{{
{
OK
}}
}}
} key.
Select [Effective] or [Invalid] using
{{
{{
{▼
}}
}}
}
or
{{
{{
{▲
}}
}}
}, and then press the
{{
{{
{
OK
}}
}}
} key.
Set other protocols you need to set in the same way.
• Select [Invalid] for unused protocols.
• Enable IPv4 to use the Pure IPv4 environment of
NetWare 5/5.1, NetWare 6/6.5.
Press the
{{
{{
{
Escape
}}
}}
} key until the screen
returns to the [Network] menu.
If you use IPv4, assign the IPv4 address
to the printer. Select [Machine IPv4
Address] using
{{
{{
{▼
}}
}}
} or
{{
{{
{▲
}}
}}
}, and then
press the
{{
{{
{
OK
}}
}}
} key.
To get the IPv4 address for the printer, contact your
network administrator.
To specify the IPv4 Address, press [IP
Add.].
If you use IPv4, assign also Subnet Mask and
Gateway Address. To assign these, press [Subnet M]
or [Gateway] instead.
Enter the address using
{{
{{
{▼
}}
}}
} or
{{
{{
{▲
}}
}}
}, and
then press the
{{
{{
{
OK
}}
}}
} key. settings made.
Press the {▼} or {▲} key to enter the left most entry
field of the address. After entering the left field, press
the {
OK
} key, and then you can enter the next field.
After completing to enter in the all fields, press the
{
OK
} key. Use this
method to assign Subnet Mask and Gateway Address.
• Do not set “011.022.033.044” as the IPv4 address.
• The value moves by 10 if the {▼} or {▲} key is
kept pressed.
Select [Specify] using
{{
{{
{▼
}}
}}
} or
{{
{{
{▲
}}
}}
}, and
then press the
{{
{{
{
OK
}}
}}
} key.
If you do not select [Specify] in this step, the address
you set will not be saved.
Press the
{{
{{
{
Menu
}}
}}
} key to return to the
initial screen.
Print a configuration page to confirm the
settings made.
• For details about printing the configuration page, see
“Test Printing”.
Click
[Quick Install]
.
The software license agreement appears in the
[License Agreement] dialog box.
This is an example when English is selected in
step
.
After reading through all of the contents,
click
[I accept the agreement]
to agree with
the License Agreement, and then click
[Next >]
.
Select the printer model you want to
install in the “Select Printer” dialog box.
• For a network connection via TCP/IP, select the printer
whose IP address is displayed in [Connect to].
• For parallel connection, select the printer whose
printer port is displayed in [Connect to].
Click
[Install]
.
The following display appears while installing the
printer driver.
Click
[Finish
].
A message about restarting the computer may appear.
Restart the computer to complete installation.
Click
[Exit]
in the first dialog box of the
installer, and then take out the CD-ROM.
• To stop installation of the selected software, click
[Cancel] before installation is completed.
• Auto Run may not work with the certain operating
system settings. If this happens, launch “Setup.exe”
on the CD-ROM root directory.
• Select a printer to whose IP (IPv4) address is displayed
in [Connect To] to install SmartDeviceMonitor for
Client when using TCP/IP.
• Quick Install is not available unless bidirectional
communication between the printer and computer is
enabled via parallel connection. For details about
bidirectional communication between printer and
computer, see “Printing with Parallel Connection”,
Software Guide.
INSTALLING THE PRINTER
DRIVER
You can install the printer drivers and software easily
from the CD-ROM labeled “Printer Drivers and
Utilities”.
Click [Quick Install] in the window of the CD-ROM
to install PCL and RPCS printer drivers. To install the
PostScript 3 printer driver, click the [PostScript 3 Printer
Driver] button. For more information about the
PostScript 3 printer driver, see Software Guide on the
CD-ROM labeled “Manuals”.
When the TCP/IP protocol is used, SmartDevice
Monitor for Client will be installed as well.
When using with TCP/IP protocol, confirm the
followings:
The printer is connected to a network with the 5
interface cable.
The TCP/IP protocol is set.
The IP (IPv4) address is set for the printer and the
computer.
• To install printer driver under Windows 2000/XP
Professional, Windows Server 2003, and Windows
NT 4.0, you must have an account that has Manage
Printers permission. Log on as an Administrator.
• Only the printer driver, and not the SmartDevice
Monitor for Client is installed when using this printer
under USB or parallel. If you connect using USB,
see Software Guide.
Quit all applications currently running.
Insert the CD-ROM into the CD-ROM
drive.
The installer starts.
Auto Run may not work with the certain operating
system settings. If this happens, launch
“Setup.exe” on the CD-ROM root directory.
Select an interface language, and then click
{{
{{
{
OK
}}
}}
}
.
The default interface language is English.
CLP30DN/CLP27DN/C7531dn/C7526dn/LP231cn/LP226cn/Aficio SP C411DN/Aficio SP C410DN
Quick Installation Guide 2/2
Quick Installation Guide
Copyright © 2006
EN USA G160-8606
 previous